北京赛车1元群

Professional epoxy floor construction team

Affordable, environmentally friendly, complete specifications

National Advisory Hotline:

15201636696
Position: Home > News Center > Industry News >
Industry News

How to choose the right floor type and reduce construction costs

Time: 2019-03-15 source: zyshcly.com

After market research and customer feedback, the floor company combined various problems encountered in the use of the customer, conducted specific analysis and repeated tests, and talked about helping customers using floor decorative protective coatings. To properly choose the type of floor and effectively control construction costs, customers are advised to start with the following factors:

1. Mechanical performance requirements
There are three main aspects:
1 Epoxy floor abrasion resistance: which vehicles will be used when the floor is in use;
2 Epoxy floor pressure resistance: how much load will the floor bear when in use;
3 Epoxy floor impact resistance: whether the impact force will cause the floor surface to peel off;
Second, chemical performance requirements
Consider the following two aspects:
1 Epoxy floor acid and alkali resistance: the type and concentration of corrosive chemicals during use;
2 Solvent resistance of epoxy floor: the type of solvent and contact time during use;
Third, the location of the floor
Depending on whether the floor is on the ground floor or on the ground floor, determine whether moisture-proof treatment is required or choose a special moisture-proof floor
Fourth, the ground condition
1 Grassroots strength: Generally required compressive strength ≥20Mpa;
2 Flatness: whether it needs to be repaired with epoxy mortar;
3 Self-leveling treatment is generally required before ground construction;
V. aesthetic requirements
1 color requirements: whether color division area is required;
2 brightness requirements: whether to choose matte or bright;
3 flatness requirements: whether there is a requirement for the flatness of the floor;
Six, security requirements
If the floor is in a greasy environment or on a slope, you need to choose a non-slip floor; if you are in a special place such as a gas station, oil depot, etc.
Seven, construction process:
1. Base surface treatment;
2. Apply closed primer;
3. Batch scraping putty;
4. Sanding and vacuuming;
5. Apply colored paint;
最新网络娱乐 中文电子游戏官网 网上棋牌手游大全 最火的捕鱼游戏 电玩城游戏大厅 龙8app官网 九五至尊网站是多少 电子捕鱼平台 正规棋牌游戏平台 胜博发娱乐游戏