The flooring industry is currently developing well. There is no floor for everything. Factories, parks, garages, buildings, these are all floors. The quality of the floor is very important. This affects many things. So we need to pay special attention when designing the floor. Here's how to design a garage floor paint scheme.
Generally speaking, the basic design principles for the overall design of underground parking lot traffic safety facilities are: ensure safety, facilitate traffic, smooth channelization, and facilitate management. First of all, in terms of safety, two aspects need to be considered. On the one hand, it is the design of epoxy floor paint. For example, in slippery places such as ramps, non-slip floor paint series must be used. On the other hand, it is the garage traffic safety facilities The design of the building includes the coordination of traffic flows such as underground garages, entrances, floors, and intelligent management systems, as well as the design of fully standardized transportation facilities, visual identification systems, and security systems. Secondly, in terms of site utilization, parking spaces need to be optimized to provide customers with as many parking spaces as possible.
Finally, from the perspective of service life, the design of the ground floor system requires the selection of different types of floors with different thicknesses, such as ramp floors, aisle floors, parking spaces, and unloading area floors. Only in this way can the life of the overall garage floor be greatly improved on the premise of saving costs for customers as much as possible.
What are the floor paint colors and how to determine them
The color of epoxy flooring used to be relatively single, but now with the rapid development of floor paint, its color is also diverse. Here is a brief introduction of the Fermec editor on the floor colors and how to determine them.
There are many choices of floor colors. Basically, the colors involved in the color card can be found in the corresponding floor products. However, according to the specific floor products and places of use, the general epoxy floor, the most commonly used in the workshop are green and gray; wear-resistant floor, the more commonly used are natural, green, gray, blue, iron red, etc .; And the art floor is more commonly used colors.
Although we often say green, gray and the like, there are many colors, such as cardamom green, fruit green, pea green, olive green, brilliant green, apple green, royal green, lake green and so on. If you do not use an international color card as the standard when determining the color, determine the name or color number of the corresponding color, it is easy to cause misunderstandings between the customer and the floor company, and then the customer is not satisfied with the good place. Ping color phenomenon.
Therefore, in the determination of the specific floor color, you can consult our floor engineer first, after the determination, mark its name and color number on the contract to avoid unnecessary misunderstanding.